|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue PACKAGE DIMENSIONS 0.126 (3.2) 0.110 (2.8) QTLP610CEBTR 0.043 (1.1) 0.035 (0.9) FRONT 0.020 (0.50) 0.087 (2.2) 0.071 (1.8) 0.087 (2.2) 0.071 (1.8) 0.039 (1.0) TOP 0.035 (0.9) R0.017 (0.4) CATHODE MARK BACK 0.016 (0.4) NOTE: + POLARITY APPLICATIONS * LCD edge-lighting * Edge card lighting Dimensions for all drawings are in inches (mm). Tolerance is 0.1mm unless otherwise noted. DESCRIPTION This right angle surface mount chip LED emits light in the lateral direction. Small size and wide viewing angle make this LED an ideal choice for edge-lighting LCD displays. This device utilizes an InGaN/Sapphire blue LED. FEATURES * * * * Small footprint - 3.0(L) X 2.0(W) X 1.0(H) mm Wide viewing angle of 120 Water clear optics Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel (c) 2004 Fairchild Semiconductor Corporation Page 1 of 6 6/29/04 SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise specified) Parameter Operating Temperature Storage Temperature Lead Soldering Time Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage Power Dissipation Symbol TOPR TSTG TSOL IF IFM VR PD Rating -40 to +85 -40 to +90 260 for 5 sec 30 100 5 80 Unit C C C mA mA V mW QTLP610CEBTR ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25C) Part Number Luminous Intensity (mcd) Bin I1 Bin I2 Forward Voltage (V) Bin V1 Bin V2 Dominant Wavelength (nm) Bin W2 Bin W3 Spectral Line Half Width (nm) Viewing Angle () Reverse Current (A) Tolerance: Luminous Intensity = 11% Forward Voltage = 0.1V Wavelength = 1nm 470 - 475 475 - 480 35 120 50 max IF = 5 mA IF = 5 mA IF = 5 mA VR = 5V 2.75 - 2.95 2.95 - 3.15 IF = 5 mA 8 - 16 13 - 26 IF = 5 mA QTLP610CEBTR Condition (c) 2004 Fairchild Semiconductor Corporation Page 2 of 6 6/29/04 SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage 100 1.4 QTLP610CEBTR Fig. 2 Relative Luminous Intensity vs. DC Forward Current RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 10 1 0.1 2.00 2.50 3.00 3.50 4.00 0 10 20 30 40 VF - FORWARD VOLTAGE (V) IF - FORWARD CURRENT (mA) Fig. 3 Relative Intensity vs. Peak Wavelength 1.0 RELATIVE INTENSITY 0.5 0 300 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature 50 IF - FORWARD CURRENT (mA) Fig.4 Radiation Diagram 40 -20 -30 -40 -50 -60 -70 -80 -90 1.0 -10 0 10 20 30 40 50 60 70 80 90 30 20 10 0 0 20 40 60 80 100 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 REL. LUMINOUS INTENSITY (%) TA - AMBIENT TEMPERATURE (C) (c) 2004 Fairchild Semiconductor Corporation Page 3 of 6 6/29/04 SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue RECOMMENDED PRINTED CIRCUIT BOARD PATTERN QTLP610CEBTR 0.035 (0.90) 0.035 (0.90) 0.008 (0.20) 0.008 (0.20) 0.059 (1.50) 0.059 (1.50) 0.035 (0.90) 0.035 (0.90) Light Emitting Direction 0.079 (2.00) 0.079 (2.00) 0.197 (5.00) 0.197 (5.00) Mounting Example RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240 C MAX +5 C/s MAX -5 C/s MAX 60 - 120 sec Preheating 120 - 150 C MAX (c) 2004 Fairchild Semiconductor Corporation Page 4 of 6 6/29/04 SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue TAPE AND REEL DIMENSIONS QTLP610CEBTR 2.20.5 O60.00.5 O178.01.0 O13.00.5 9.00.5 12.00.15 Progressive direction 1.75 2.00.05 4.0 O1.55.05 0.230.1 3.50.05 8.0 4.0 2.06 Polarity Dimensional tolerance is 0.1mm unless otherwise specified Angle: 0.5 Unit: mm 3.20 1.32 (c) 2004 Fairchild Semiconductor Corporation Page 5 of 6 6/29/04 SURFACE MOUNT LED LAMP RIGHT ANGLE Low VF Blue QTLP610CEBTR DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. (c) 2004 Fairchild Semiconductor Corporation Page 6 of 6 6/29/04 |
Price & Availability of QTLP610CEBTR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |